RESIN BOND KIT

£699.98£899.98

Clear

Description

Resin bound rubber safety play surface

Rubber chippings are bonded together using a polyurethane resin binder to create a continuous permanent surface.

It is ideal for parks, play areas and playgrounds.

This wet-pour like surface provides impact absorbing qualities to help prevent injuries.

The rubberised chippings can be laid in a variety of shapes and it’s also suitable for installing around existing play equipment. This safe and low maintenance safety surface meets the BS EN 1177: 1998 (impact absorption of play surfaces)

Colour of Woodland mix chippings is natural, will never fade or rub-off.

Coverage

             # 30 metres square based on 50 mm depth 

600 kilo rubber play chippings with 60 litres resin. 

( Bagged and delivered  in 1 x 600 kg bulk and 2 x 25 and 2 x 5 litres tabs )

Price £699.98 + Delivery

 

             # 40 metres square based on 50 mm depth 

800-kilo rubber play chippings with 80 litres resin. 

( Bagged and delivered  in 1 x 800 kg bulk and 3 x 25 and 1 x 5 litres tabs )

Price £899.98 + Delivery

-------------------------------------------------------------------------------------------------

                        PLEASE READ CAREFULLY 

Independently tested and meets the stringent standards laid down in BS EN 1177 (impact absorption of play surfaces)

CFH protection 1.2 metres based on 50 mm depth

Ready to use Polyurethane Resin will quickly and effectively bond rubber chippings together offering safe resin-bound surface when applied to an appropriate sub-base.

1litre of resin will be mixed with 10 kg of rubber to offer a strong soft long-lasting bound system. 

(Use 20 kg of rubber chippings and 2 litres of resin for 1 metre square at a depth of 50 mm )

Blend the rubber chippings together with resin in your mixer (standard cement mixer), then mix thoroughly until covered evenly.

Make a pit or frame to the required size. Ideally spread a permeable underlay ( not included) within this area to discourage any earth, weed or grass growing through.

Now spread the coated rubber over your prepared sub-base, trowel out to a thickness of 50 mm.

This resin will be touch dry in 4-6 hours and serviceable after 24 hours, ideally leave for 36 hours. Please note all polyurethane resins SHOULD NOT be exposed to wet conditions until at least 4-6 hours.

Resin-bond surface is independently tested and meets the standards laid down in BS EN 1177 : 1998 (impact absorption of play surfaces)

CFH up to 1.2m based on 50mm depth

Additional information

Colour

Woodland Mix, Black

Coverage

30 metres square, 40 metres square

TOP